#include <qaudiooutput_alsa_p.h>

Inheritance diagram for OutputPrivate:

Public Functions
	OutputPrivate (QAudioOutputPrivate *audio)

	OutputPrivate (QAudioOutputPrivate *audio)

qint64	readData (char *data, qint64 len)
	Reads up to maxSize bytes from the device into data, and returns the number of bytes read or -1 if an error occurred. More...

qint64	readData (char *data, qint64 len)
	Reads up to maxSize bytes from the device into data, and returns the number of bytes read or -1 if an error occurred. More...

qint64	writeData (const char *data, qint64 len)
	Writes up to maxSize bytes from data to the device. More...

qint64	writeData (const char *data, qint64 len)
	Writes up to maxSize bytes from data to the device. More...

	~OutputPrivate ()

	~OutputPrivate ()

Public Functions inherited from QIODevice
virtual bool	atEnd () const
	Returns true if the current read and write position is at the end of the device (i.e. More...

virtual qint64	bytesAvailable () const
	Returns the number of bytes that are available for reading. More...

virtual qint64	bytesToWrite () const
	For buffered devices, this function returns the number of bytes waiting to be written. More...

virtual bool	canReadLine () const
	Returns true if a complete line of data can be read from the device; otherwise returns false. More...

virtual void	close ()
	First emits aboutToClose(), then closes the device and sets its OpenMode to NotOpen. More...

QString	errorString () const
	Returns a human-readable description of the last device error that occurred. More...

bool	getChar (char *c)
	Reads one character from the device and stores it in c. More...

bool	isOpen () const
	Returns true if the device is open; otherwise returns false. More...

bool	isReadable () const
	Returns true if data can be read from the device; otherwise returns false. More...

virtual bool	isSequential () const
	Returns true if this device is sequential; otherwise returns false. More...

bool	isTextModeEnabled () const
	Returns true if the Text flag is enabled; otherwise returns false. More...

bool	isWritable () const
	Returns true if data can be written to the device; otherwise returns false. More...

virtual bool	open (OpenMode mode)
	Opens the device and sets its OpenMode to mode. More...

OpenMode	openMode () const
	Returns the mode in which the device has been opened; i.e. More...

qint64	peek (char *data, qint64 maxlen)
	Reads at most maxSize bytes from the device into data, without side effects (i. More...

QByteArray	peek (qint64 maxlen)
	Peeks at most maxSize bytes from the device, returning the data peeked as a QByteArray. More...

virtual qint64	pos () const
	For random-access devices, this function returns the position that data is written to or read from. More...

bool	putChar (char c)
	Writes the character c to the device. More...

	QIODevice ()
	Constructs a QIODevice object. More...

	QIODevice (QObject *parent)
	Constructs a QIODevice object with the given parent. More...

qint64	read (char *data, qint64 maxlen)
	Reads at most maxSize bytes from the device into data, and returns the number of bytes read. More...

QByteArray	read (qint64 maxlen)
	Reads at most maxSize bytes from the device, and returns the data read as a QByteArray. More...

QByteArray	readAll ()
	Reads all available data from the device, and returns it as a QByteArray. More...

qint64	readLine (char *data, qint64 maxlen)
	This function reads a line of ASCII characters from the device, up to a maximum of maxSize - 1 bytes, stores the characters in data, and returns the number of bytes read. More...

QByteArray	readLine (qint64 maxlen=0)
	Reads a line from the device, but no more than maxSize characters, and returns the result as a QByteArray. More...

virtual bool	reset ()
	Seeks to the start of input for random-access devices. More...

virtual bool	seek (qint64 pos)
	For random-access devices, this function sets the current position to pos, returning true on success, or false if an error occurred. More...

void	setTextModeEnabled (bool enabled)
	If enabled is true, this function sets the Text flag on the device; otherwise the Text flag is removed. More...

virtual qint64	size () const
	For open random-access devices, this function returns the size of the device. More...

void	ungetChar (char c)
	Puts the character c back into the device, and decrements the current position unless the position is 0. More...

virtual bool	waitForBytesWritten (int msecs)
	For buffered devices, this function waits until a payload of buffered written data has been written to the device and the bytesWritten() signal has been emitted, or until msecs milliseconds have passed. More...

virtual bool	waitForReadyRead (int msecs)
	Blocks until new data is available for reading and the readyRead() signal has been emitted, or until msecs milliseconds have passed. More...

qint64	write (const char *data, qint64 len)
	Writes at most maxSize bytes of data from data to the device. More...

qint64	write (const char *data)
	Writes data from a zero-terminated string of 8-bit characters to the device. More...

qint64	write (const QByteArray &data)
	Writes the content of byteArray to the device. More...

virtual	~QIODevice ()
	The destructor is virtual, and QIODevice is an abstract base class. More...

Public Functions inherited from QObject
bool	blockSignals (bool b)
	If block is true, signals emitted by this object are blocked (i.e., emitting a signal will not invoke anything connected to it). More...

const QObjectList &	children () const
	Returns a list of child objects. More...

bool	connect (const QObject sender, const char signal, const char *member, Qt::ConnectionType type=Qt::AutoConnection) const

bool	disconnect (const char signal=0, const QObject receiver=0, const char *member=0)

bool	disconnect (const QObject receiver, const char member=0)

void	dumpObjectInfo ()
	Dumps information about signal connections, etc. More...

void	dumpObjectTree ()
	Dumps a tree of children to the debug output. More...

QList< QByteArray >	dynamicPropertyNames () const
	Returns the names of all properties that were dynamically added to the object using setProperty(). More...

virtual bool	event (QEvent *)
	This virtual function receives events to an object and should return true if the event e was recognized and processed. More...

virtual bool	eventFilter (QObject , QEvent )
	Filters events if this object has been installed as an event filter for the watched object. More...

template<typename T >
T	findChild (const QString &aName=QString()) const
	Returns the child of this object that can be cast into type T and that is called name, or 0 if there is no such object. More...

template<typename T >
QList< T >	findChildren (const QString &aName=QString()) const
	Returns all children of this object with the given name that can be cast to type T, or an empty list if there are no such objects. More...

template<typename T >
QList< T >	findChildren (const QRegExp &re) const

bool	inherits (const char *classname) const
	Returns true if this object is an instance of a class that inherits className or a QObject subclass that inherits className; otherwise returns false. More...

void	installEventFilter (QObject *)
	Installs an event filter filterObj on this object. More...

bool	isWidgetType () const
	Returns true if the object is a widget; otherwise returns false. More...

void	killTimer (int id)
	Kills the timer with timer identifier, id. More...

virtual const QMetaObject *	metaObject () const
	Returns a pointer to the meta-object of this object. More...

void	moveToThread (QThread *thread)
	Changes the thread affinity for this object and its children. More...

QString	objectName () const

QObject *	parent () const
	Returns a pointer to the parent object. More...

QVariant	property (const char *name) const
	Returns the value of the object's name property. More...

Q_INVOKABLE	QObject (QObject *parent=0)
	Constructs an object with parent object parent. More...

void	removeEventFilter (QObject *)
	Removes an event filter object obj from this object. More...

void	setObjectName (const QString &name)

void	setParent (QObject *)
	Makes the object a child of parent. More...

bool	setProperty (const char *name, const QVariant &value)
	Sets the value of the object's name property to value. More...

void	setUserData (uint id, QObjectUserData *data)

bool	signalsBlocked () const
	Returns true if signals are blocked; otherwise returns false. More...

int	startTimer (int interval)
	Starts a timer and returns a timer identifier, or returns zero if it could not start a timer. More...

QThread *	thread () const
	Returns the thread in which the object lives. More...

QObjectUserData *	userData (uint id) const

virtual	~QObject ()
	Destroys the object, deleting all its child objects. More...

Properties
QAudioOutputPrivate *	audioDevice

Friends
class	QAudioOutputPrivate

Additional Inherited Members
Public Types inherited from QIODevice
enum	OpenModeFlag { NotOpen = 0x0000, ReadOnly = 0x0001, WriteOnly = 0x0002, ReadWrite = ReadOnly \| WriteOnly, Append = 0x0004, Truncate = 0x0008, Text = 0x0010, Unbuffered = 0x0020 }
	This enum is used with open() to describe the mode in which a device is opened. More...

Public Slots inherited from QObject
void	deleteLater ()
	Schedules this object for deletion. More...

Signals inherited from QIODevice
void	aboutToClose ()
	This signal is emitted when the device is about to close. More...

void	bytesWritten (qint64 bytes)
	This signal is emitted every time a payload of data has been written to the device. More...

void	readChannelFinished ()
	This signal is emitted when the input (reading) stream is closed in this device. More...

void	readyRead ()
	This signal is emitted once every time new data is available for reading from the device. More...

Signals inherited from QObject
void	destroyed (QObject *=0)
	This signal is emitted immediately before the object obj is destroyed, and can not be blocked. More...

Static Public Functions inherited from QObject
static bool	connect (const QObject sender, const char signal, const QObject receiver, const char member, Qt::ConnectionType=Qt::AutoConnection)
	Creates a connection of the given type from the signal in the sender object to the method in the receiver object. More...

static bool	connect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &method, Qt::ConnectionType type=Qt::AutoConnection)

static bool	disconnect (const QObject sender, const char signal, const QObject receiver, const char member)
	Disconnects signal in object sender from method in object receiver. More...

static bool	disconnect (const QObject sender, const QMetaMethod &signal, const QObject receiver, const QMetaMethod &member)

static uint	registerUserData ()

static QString	tr (const char sourceText, const char comment=0, int n=-1)

static QString	trUtf8 (const char sourceText, const char comment=0, int n=-1)

Static Public Variables inherited from QObject
static const QMetaObject	staticMetaObject
	This variable stores the meta-object for the class. More...

Protected Functions inherited from QIODevice
	QIODevice (QIODevicePrivate &dd, QObject *parent=0)

virtual qint64	readLineData (char *data, qint64 maxlen)
	Reads up to maxSize characters into data and returns the number of characters read. More...

void	setErrorString (const QString &errorString)
	Sets the human readable description of the last device error that occurred to str. More...

void	setOpenMode (OpenMode openMode)
	Sets the OpenMode of the device to openMode. More...

Protected Functions inherited from QObject
virtual void	childEvent (QChildEvent *)
	This event handler can be reimplemented in a subclass to receive child events. More...

virtual void	connectNotify (const char *signal)
	This virtual function is called when something has been connected to signal in this object. More...

virtual void	customEvent (QEvent *)
	This event handler can be reimplemented in a subclass to receive custom events. More...

virtual void	disconnectNotify (const char *signal)
	This virtual function is called when something has been disconnected from signal in this object. More...

	QObject (QObjectPrivate &dd, QObject *parent=0)

int	receivers (const char *signal) const
	Returns the number of receivers connected to the signal. More...

QObject *	sender () const
	Returns a pointer to the object that sent the signal, if called in a slot activated by a signal; otherwise it returns 0. More...

int	senderSignalIndex () const

virtual void	timerEvent (QTimerEvent *)
	This event handler can be reimplemented in a subclass to receive timer events for the object. More...

Protected Variables inherited from QObject
QScopedPointer< QObjectData >	d_ptr

Static Protected Variables inherited from QObject
static const QMetaObject	staticQtMetaObject

Related Functions inherited from QObject
T	qFindChildqFindChildren (const QObject *obj, const QString &name)()

QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QString &name)()

QList< T >	qFindChildrenqFindChildren (const QObject *obj, const QRegExp &regExp)()

T *	qobject_cast (QObject *object)

	QObjectList

void *	qt_find_obj_child (QObject parent, const char type, const QString &name)
	Returns a pointer to the object named name that inherits type and with a given parent. More...

Detailed Description

Definition at line 149 of file qaudiooutput_alsa_p.h.

Constructors and Destructors

◆ OutputPrivate() [1/2]

OutputPrivate::OutputPrivate ( QAudioOutputPrivate * audio )

Definition at line 757 of file qaudiooutput_alsa_p.cpp.

Referenced by QAudioOutputPrivate::freeBlocks().

 {
     audioDevice = qobject_cast<QAudioOutputPrivate*>(audio);
 }

◆ ~OutputPrivate() [1/2]

OutputPrivate::~OutputPrivate ( )

Definition at line 762 of file qaudiooutput_alsa_p.cpp.

Referenced by QAudioOutputPrivate::freeBlocks().

762 {}

◆ OutputPrivate() [2/2]

OutputPrivate::OutputPrivate ( QAudioOutputPrivate * audio )

◆ ~OutputPrivate() [2/2]

OutputPrivate::~OutputPrivate ( )

Functions

◆ readData() [1/2]

qint64 OutputPrivate::readData	(	char *	data,
		qint64	maxSize
	)

virtual

Reads up to maxSize bytes from the device into data, and returns the number of bytes read or -1 if an error occurred.

If there are no bytes to be read and there can never be more bytes available (examples include socket closed, pipe closed, sub-process finished), this function returns -1.

This function is called by QIODevice. Reimplement this function when creating a subclass of QIODevice.

When reimplementing this function it is important that this function reads all the required data before returning. This is required in order for QDataStream to be able to operate on the class. QDataStream assumes all the requested information was read and therefore does not retry reading if there was a problem.

See also: read() readLine() writeData()

Implements QIODevice.

◆ readData() [2/2]

qint64 OutputPrivate::readData	(	char *	data,
		qint64	maxSize
	)

virtual

Reads up to maxSize bytes from the device into data, and returns the number of bytes read or -1 if an error occurred.

If there are no bytes to be read and there can never be more bytes available (examples include socket closed, pipe closed, sub-process finished), this function returns -1.

This function is called by QIODevice. Reimplement this function when creating a subclass of QIODevice.

When reimplementing this function it is important that this function reads all the required data before returning. This is required in order for QDataStream to be able to operate on the class. QDataStream assumes all the requested information was read and therefore does not retry reading if there was a problem.

See also: read() readLine() writeData()

Implements QIODevice.

Definition at line 764 of file qaudiooutput_alsa_p.cpp.

Referenced by QAudioOutputPrivate::freeBlocks().

 {
     Q_UNUSED(data)
     Q_UNUSED(len)
 
     return 0;
 }

◆ writeData() [1/2]

qint64 OutputPrivate::writeData	(	const char *	data,
		qint64	maxSize
	)

virtual

Writes up to maxSize bytes from data to the device.

Returns the number of bytes written, or -1 if an error occurred.

This function is called by QIODevice. Reimplement this function when creating a subclass of QIODevice.

When reimplementing this function it is important that this function writes all the data available before returning. This is required in order for QDataStream to be able to operate on the class. QDataStream assumes all the information was written and therefore does not retry writing if there was a problem.

See also: read() write()

Implements QIODevice.

◆ writeData() [2/2]

qint64 OutputPrivate::writeData	(	const char *	data,
		qint64	maxSize
	)

virtual

Writes up to maxSize bytes from data to the device.

Returns the number of bytes written, or -1 if an error occurred.

This function is called by QIODevice. Reimplement this function when creating a subclass of QIODevice.

When reimplementing this function it is important that this function writes all the data available before returning. This is required in order for QDataStream to be able to operate on the class. QDataStream assumes all the information was written and therefore does not retry writing if there was a problem.

See also: read() write()

Implements QIODevice.

Definition at line 772 of file qaudiooutput_alsa_p.cpp.

Referenced by QAudioOutputPrivate::freeBlocks().

 {
     int retry = 0;
     qint64 written = 0;
     if((audioDevice->deviceState == QAudio::ActiveState)
             ||(audioDevice->deviceState == QAudio::IdleState)) {
         while(written < len) {
             int chunk = audioDevice->write(data+written,(len-written));
             if(chunk <= 0)
                 retry++;
             written+=chunk;
             if(retry > 10)
                 return written;
         }
     }
     return written;
 
 }

Friends and Related Functions

◆ QAudioOutputPrivate

friend class QAudioOutputPrivate

friend

Definition at line 151 of file qaudiooutput_alsa_p.h.

Properties

◆ audioDevice

QAudioOutputPrivate * OutputPrivate::audioDevice

private

Definition at line 161 of file qaudiooutput_alsa_p.h.

The documentation for this class was generated from the following files:

/src/multimedia/audio/qaudiooutput_alsa_p.h
/src/multimedia/audio/qaudiooutput_win32_p.h
/src/multimedia/audio/qaudiooutput_alsa_p.cpp
/src/multimedia/audio/qaudiooutput_win32_p.cpp

Public Functions

Properties

Friends

Additional Inherited Members

Detailed Description

Constructors and Destructors

◆ OutputPrivate() [1/2]

◆ ~OutputPrivate() [1/2]

◆ OutputPrivate() [2/2]

◆ ~OutputPrivate() [2/2]

Functions

◆ readData() [1/2]

◆ readData() [2/2]

◆ writeData() [1/2]

◆ writeData() [2/2]

Friends and Related Functions

◆ QAudioOutputPrivate

Properties

◆ audioDevice